[INCH-POUND]
A-A-55001/4B
May 23, 1996
SUPERSEDING
A-A-55001/4A
May 1, 1995
COMMERCIAL ITEM DESCRIPTION
DISK DRIVE UNIT, FOUR DRIVE, SMALL COMPUTER SYSTEM INTERFACE (SCSI),
HALF HEIGHT, EXTERNAL, CD-ROM, AND OTHER ACCESSORIES
The General Services Administration has authorized the use of this
commercial item description (CID) for all federal agencies.
1. SCOPE. This CID covers the general requirements for a four drive, multimedia, half height, CD-ROM,
disk drive unit with one controller card, cabinet, interface cables, four cartridges, software programs and
other accessories as specified. CD-ROM disk drive units covered by this CID are intended for
commercial/industrial applications.
2. CLASSIFICATION. This CID uses a classification system which is included in the Part or Identification
Number (PIN). The PIN shall be AA55001/04- (plus a dash number from table I). Complete PIN example:
AA55001/04-02 (see 6.1).
3. SALIENT CHARACTERISTICS
3.1 Design and construction. CD-ROM disk drive units supplied to this CID shall be as specified herein.
3.2 Weight. The weight of this CD-ROM disk drive unit shall not exceed 14.53 kilograms (32 pounds) as a
complete unit.
3.3 Federal Communications Commission (FCC) approval. This CD-ROM disk drive unit shall be certified
to FCC class B computing devices pursuant to subpart J of part 15 of FCC rules. A CD-ROM disk drive unit
consists of a number of connected CD-ROM disk drives within a single cabinet as a distinct fully integrated
unit.
3.4 UL approval. The complete CD-ROM disk drive unit shall be certified to comply to UL 1950 for
electronic data processing (EDP) equipment. Certification shall be performed by UL or another nationally
recognized testing laboratory licensed by the United States Government to certify electrical products for
compliance to UL standards.
Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data which
may improve this document should be sent to: Defense Electronics Supply Center, ATTN: DESC-
ELDM 1507 Wilmington Pike, Dayton, OH 45444-5765, or telephone (513) 296-6189, or facsimile
(FAX) (513) 296-8868.
AMSC N/A
FSC 7025
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business